Connections
Do not connect the power cord until all other connections have been made.
• You can get better picture quality in the order — HDMI > Component video >
Center unit | HDMI cord (not supplied) |
| ||
|
| |||
Digital optical audio cord | To HDMI output | |||
|
| |||
(not supplied) |
|
| ||
| To digital optical |
|
| |
RCA pin plug cord | audio output | DVD recorder, DVD player, |
| |
To analog |
| |||
satellite tuner, VCR |
| |||
(not supplied) |
|
| ||
| audio output | or game console |
| |
|
|
| ||
Align the 5 |
| To | To composite | To component |
marks. |
| output | video output | video output |
|
| |||
(not supplied) |
|
| ||
|
| or |
|
|
Composite video cord (supplied) |
|
|
Component video cord
(not supplied)
NOTE
•Unify the way of TV connection and that of video component’s (for example, connect a video component through
•The audio signal through the HDMI VIDEO 1 IN terminal is not reproduced on this system. The signal is reproduced on the TV connected with HDMI MONITOR OUT terminal.
•Use an HDMI cable shorter than 5 m (15 ft).
•When you are playing HDCP
•If the component video output jacks of your video components of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.
•When shipped from the factory, the source of “VIDEO 1” have been set for use with the AUDIO VIDEO 1 IN terminal for the audio connection. If you connect the components with digital optical audio cord, change the audio input (VIDEO 1) setting to “Digital.” (See page 31.)
•Before connecting a digital optical cable, unplug the protective plug from DIGITAL IN VIDEO 1 terminal.
•If you connect a
10