Operations for USB MEMORY

See page 21 for button locations.

Resuming playback

When Resume Playback is set to “ON” (see page 31) and you stop playback by the following operations, the position where playback has been stopped is stored. (“RESUME” appears on the display window.)

•Turning off the power (see page 16)

•Pressing 7once

•Changing the source (see page 16)

To start playback from the stored position

•Press USB MEMORY 6on the remote control or iPod/ USB MEMORY CONTROL ‹/8on the center unit.

•Select “USB MEMORY” as the source again if you changed the source.

To clear the stored position

Press 7again.

•Disconnecting the USB mass storage class device also clears the stored position.

Zooming in

7During playback or while paused

1 Press ZOOM.

Each time you repeat the procedure, the scene magnification changes.

2 While zoomed in, press 2/3/5/Yto move zoom-in area.

To return to normal playback

Press ZOOM repeatedly, to select OFF.

NOTE

•The number of the magnification steps varies depending on the file type.

•During slide-show playback of JPEG, zooming in is not available. In such a case, press USB MEMORY 6to pause slide-show playback, then zoom in.

•During playback, 2/3/5/Ymay not work in step 2.

Changing the VFP setting

The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programming, picture tone or personal preference.

7During playback

1 Press VFP.

The current VFP settings appear on the TV screen.

Example:

2 Press 2/3repeatedly to select the VFP mode.

•NORMAL: Normally select this.

•CINEMA: Suitable for movies.

When you select “NORMAL” or “CINEMA,” press VFP to complete the setting.

•USER 1 and USER 2: You can adjust parameters that affect picture appearance.

Only when selecting “USER 1” or “USER 2” in step 2, proceed to perform the following operation;

3 Press 5/Yrepeatedly to select aparameter you want to adjust.

Adjust gradually and confirm picture appearance results are as preferred.

• GAMMA: Control brightness of neutral tints while maintaining brightness of dark and bright portions (–3 to +3).

• BRIGHTNESS: Control screen brightness (–8 to +8).

• CONTRAST: Control screen contrast (–7 to +7).

• SATURATION: Control screen color depth (–7 to +7).

• TINT: Control screen tint (–7 to +7).

• SHARPNESS: Control screen sharpness (–8 to +8).

4 Press ENTER.

Example:

5

6

7

8

Press 5/Yto change the setting.Press ENTER.

The current VFP settings appear again.

Repeat steps 3 to 6 to adjust other parameters.Press VFP.

NOTE

•If the setting display disappears in the middle of the procedure, the setting at that time will be stored.

25