Basic operations

The buttons on the remote control are used to explain most of the operations in this manual. You can use the buttons on the center unit if they have the same name or marks as on the remote control, unless otherwise noted.

•The icon such as shows the file types the operation is available for.

The buttons described below are used on pages 16 to 18.

Turning the system on/off

On the remote control:

Press AUDIO.

On the center unit:

Press .

NOTE

•A small amount of power is consumed even when the power is turned off. This is called standby mode and the STANDBY lamp lights in this mode. Unplug the power cord from the AC outlet to turn the power off completely.

•You can also turn on the system by pressing the following buttons;

–One of the source selecting buttons on the remote control (VIDEO1, VIDEO2, VIDEO3, iPod 6and USB MEMORY 6)

–iPod/USB MEMORY CONTROL ‹/8on the center unit. (Turning on by the button automatically changes the source to USB MEMORY except when the last source was iPod.)

Selecting the source to play

On the remote control:

Press one of the source selecting buttons (VIDEO1 - 3,USB MEMORY 6, or iPod 6).

USB MEMORY 6: To play back a file in a USB mass storage class device. (See page 21.)

iPod 6: To start play back a connected iPod. (See page 19.)

VIDEO1 - 3: To select the external components connected to the VIDEO 1 - 3 terminals on the center unit. (See page 10 to 12.)

On the center unit:

Press INPUT SELECTOR 9 / 8 repeatedly until the source name you want appears on the display window.

NOTE

•The source selection lamp of the selected source lights up on the center unit.

•It may take time to change the source.

16