For the locations of the remote control buttons, refer to page 17.

Auto standby function

If no sound is produced for 3 minutes, the main unit automatically turns off.

This function is available when a disc/file is selected as the source.

You cannot use this function when a radio broadcast or a device connected to the [LINE IN 1], [LINE IN 2] or [LINE-DIGITAL IN] terminals is selected as the source.

Activating the auto standby function

■When a disc/file is selected as the source

Press [A.STANDBY].

.

“A. STANDBY” indicator

•Pressing [A.STANDBY] once again deactivates the function. (The display window changes to “A.STANDBY OFF”.)

Performance of the auto standby function

When playback of a disc/file finishes, the auto standby function starts a countdown.

At this time, the “A.STANDBY” indicator starts flashing.

20 seconds before the main unit turns off, “A.STANDBY” starts flashing.

When no operation is carried out for 3 minutes, the main unit automatically turns off.

NOTE

•Leaving the volume at “0” is not the same as producing no sound, and therefore does not start the auto standby function.

Locking disc ejection

You can lock the disc tray to prevent the disc from being ejected.

Setting the disc ejection lock

■When the main unit is turned off

Press 0while holding down 7on the main unit.

•Repeat this step to cancel the disc ejection lock. (The display window changes to “UNLOCKED”.)

Basic operations

20