Playing back sources from other devices
Selecting other devices as the source
1 Press [LINE].•Each time you press [LINE], the display changes in the display window as follows.
-“LINE 1” for selecting the device con- nected to the [LINE IN 1] terminal
-“LINE 2” for selecting the device con- nected to the [LINE IN 2] terminals
-
•You can also select the connected device as the source by repeatedly pressing [SOURCE] on the main unit.
•Refer also to the operation manual for the connected device.
3 Adjust the volume and make other necessary settings.• Refer to “Basic operations” on page 17.
Selecting the signal gain
You can select the gain of the signal from the [LINE IN 1] and [LINE IN 2] terminals.
Use the initial settings for normal operation. If the sound is too small or too loud, change the settings.
1 Press [LINE] repeatedly to select “LINE 1” or “LINE 2” in the display window.2 Hold down [ENTER].•Each time you hold down [ENTER], the dis- play changes as follows.
“LEVEL 1” : the initial setting for “LINE 2”
“LEVEL 2”
“LEVEL 3” : the initial setting for “LINE 1”
•The signal gain increases in the order of “LEVEL 1”, “LEVEL 2” and “LEVEL 3”.
NOTE
•You can select the signal gain respectively for “LINE 1” and “LINE 2”.
42