Playing back sources from other devices (continued) | For the locations of the remote |
control buttons, refer to page 42. | |
|
|
|
|
Playing back sources from other devices
QP LINK
When you start analog playback of a portable digital audio player connected to the [LINE IN 1] terminal while the main unit is off or another source is selected, the main unit automatically turns on and the source changes to the connected portable digital audio player. This function is called the quick portable link function (QP LINK).
Activating QP LINK
•To deactivate QP LINK, select “QP OFF”.
•You can set QP LINK when the main unit is both on and off.
*1
Using QP LINK
■When “QP ON” is selected
1 Connect a portable digital audio player to the [LINE IN 1] terminal using an audio cable.
Main unit (front view)
Audio cable (not supplied)
| Portable digital audio player or | |
Output | ||
other audio device | ||
|
•If the main unit is off, the main unit automati- cally turns on.
•The source from the portable digital audio player is automatically selected, “LINE 1” is displayed and sound is produced.
NOTE
*1 When “QP ON” is displayed, “:ACT” or “:NO ACT” is also displayed to indicate the status of QP LINK. (According to the status of the main unit, “:ACT” and “:NO ACT” changes automati- cally.)
-“QP ON :ACT” is displayed when QP LINK is activated and available.
-“QP ON :NO ACT” is displayed when QP
LINK is activated but unavailable.
Pressing [QP LINK] once can be used to confirm the status of QP LINK.
Selecting the sensitivity for QP LINK
If the sensitivity for the input audio signal is too high, QP LINK may be activated even when the portable digital audio player is not played back. At this time, you can select the lower sensitivity.
Hold down [QP LINK].•Each time you hold down [QP LINK], the display changes in the display window as follows.
-“QP: LEVEL1” for normal usage (the initial set- ting)
-“QP: LEVEL2” for lower sensitivity
43