Convenient functions of disc/file playback (continued)

For the locations of the remote

control buttons, refer to page 31.

 

 

 

 

Convenient functions of disc/file playback

Adjusting the picture quality (VFP)

■When a disc is played back or paused

1 Press [VFP].

•The current settings are displayed.

TV screen (example)

Selected VFP mode

2 Press 2or 3to select VFP mode.

•Each time you press 2 or 3, VFP mode changes on the TV screen as follows.

-“NORMAL”

For normal playback. (You cannot adjust the image quality.) Go to step 7.

-“CINEMA”

Suitable for viewing a movie in a dim room. (You cannot adjust the image quality.)

Go to step 7.

-“USER1/USER2”

You can adjust the image quality. Go to step 3.

3 Press 5 or / to select the item you want to adjust.

•Each time you press 5or /, the item changes on the TV screen as follows.

-“GAMMA”

Controls the brightness of neutral tints while maintaining the brightness of dark and light portions. (Selectable options: “LOW”, “MID” and “HIGH”)

-“BRIGHTNESS”

Controls the brightness of the display. (Setting range: –8 to +8)

-“CONTRAST”

Controls the contrast of the display. (Set- ting range: –12 to +12)

-“SATURATION”

Controls the saturation of the display. (Set- ting range: –16 to +16)

-“TINT”

Controls the tint of the display. (Setting range: –16 to +16)

-“SHARPNESS”

Controls the sharpness of the display. (Selectable options: “LOW” and “HIGH”)

4 Press [ENTER].

TV screen (example)

5 Press 5or /to change the value.6 Press [ENTER].

• To adjust other items, go back to step 3.

7 Press [VFP].

NOTE

•This function does not work when the [HDMI] terminal on the main unit is connected to a TV.

•If no operation is made for several seconds dur- ing the procedure, the settings made so far are automatically stored.

•“VFP” stands for “Video Fine Processor”.

35