Connecting the speakers

Assembling the speaker stands (DD-8)

The speakers for DD-8 must be assembled to the speaker stands before the speakers can be connected to the subwoofer. Follow the diagrams below.

Left and right speakers

Center surround speaker

■CAUTION

• The left and right speakers for DD-8 are considerably heavy. Care must be taken in carrying and handling them. Injury to personnel or damage to devices may result if the left/right speaker falls.

Speaker body

Speaker stand

Mount the speaker body perpendicular to the speaker stand. Use the supplied M4 x 25-mm screws

(3) to fasten each speaker to its speaker stand.

Red

Use the supplied M5 x 14-mm screws

(2) to fasten the speaker stand.

■CAUTION

•The center surround speaker for DD-8 can be installed on a wall.

•Be sure to have the speaker installed on the wall by qualified personnel.

•DO NOT install the speaker on the wall by your- self to avoid unexpected damage from it falling off the wall due to incorrect installation or weak- ness in wall structure.

•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to devices may result if the installed speaker interferes with daily activities.

Black

Black line

Left/right speaker cable (supplied)

Remove the screw and the terminal cover. After connecting the speaker cables, reattach the terminal cover to the speaker body and tighten the screw.

Preparation

6