For the locations of the remote control buttons, refer to page 44.
Manufacturer codes for DBSs
Examples:
For an Echostar DBS: Press [2], then [1].
For a Sony DBS: Press [2], then [0].
When the manufacturer of your DBS has 2 or more codes, select the manufacturer codes in turn and find the one that operates the DBS and the remote control properly.
Manufacturer | Code |
G. I. | 01, 02, 03, 04, 05, 06, 07, 08 |
Echostar | 21 |
Hamlin | 15, 16, 17, 18 |
Jerrold | 01, 02, 03, 04, 05, 06, 07, 08 |
Pioneer | 13, 14 |
RCA | 19 |
Scientific Atlanta | 09, 10 |
Sony | 20 |
Zenith | 11, 12 |
NOTE
•Manufacturer codes are subject to change with- out notice. You may not be able to operate the VCR/DBS produced by the manufacturer.
•After replacing the batteries of the remote con- trol, set the manufacturer code again.
Using the remote control for the VCR/DBS operation
Before the VCR/DBS operation, select the remote control mode for the VCR/DBS.
1 Slide the remote control mode selector to [VCR/ DBS].2 Press [VCR] or [DBS].
Operate the remote control by pointing it at the VCR/DBS.
Remote control button assigned for the VCR operation
Remote control button | Usage |
[VCR/DBS F] | Turns on/off the VCR. |
[VCR] | Selects the VCR input. |
[TV CHANNEL | Changes channels. |
Number buttons | Selects the channels. |
| |
[DVD/CD 3] | Starts playback. |
7 | Stops playback. |
|
|
8 | Pauses playback. |
¡ | |
1 |
Remote control button assigned for the DBS operation
Remote control button Usage | |
[VCR/DBS F] | Turns on/off the DBS. |
[DBS] | Selects the DBS input. |
[TV CHANNEL | Changes channels. |
Number buttons
NOTE
•When the remote control mode selector is slid to [VCR/DBS], some buttons may not work.
Operating other devices using the remote control
46