Connecting to Various Devices
Connecting the Power Cord (Supplied)After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN POWER switch yet.
Attach a plug which matches your wall outlet, to the power cord. For how to attach a plug, consult your dealer or a local service center.
1Insert the supplied power cord into the power input terminal (AV IN ~) of the projector.
1.Remove the power input terminal cover.
The cover is a screwed type. Turn the cover in the direction of the arrow to remove.
2.Insert the projector plug of the supplied power cord into the power input terminal of the projector. Align the groove on the projector plug of the power cord with the claw on the power input terminal of the projector, and push the plug in firmly.
After that, turn the ring on the plug in the direction of the arrow to fix.
• Remove the lens cap.
CAUTION
•Be sure to remove the cap; otherwise, it may be deformed (or degraded in quality) or melted, possibly causing a fire or malfunction.
Lens cap
CAUTIONS
To prevent fire and electric shock, observe the following:
•When you do not use devices, pull out their power cords from wall outlets.
•Do not connect the devices with power cords other than supplied.
•Do not use voltage other than the power voltage indicated.
•Do not scar, damage, or work on the power cords. Also, do not put a heavy object on, heat or pull the power cords, otherwise they may be damaged.
•Do not insert or pull out the plugs with a wet hand.
CAUTIONS
•Since the power requirement of the projector is high, be sure to insert the power plug directly into a wall outlet.
•This projector requires a single phase,
22