Operating the Main Menu
Configuration of the Main MenuMain menu
PIXEL CLOCK | TRACKING: | The lateral size and display area of video image are adjusted. |
| PHASE: | Flickering or dim video image is adjusted. |
|
|
|
POSITION | V. POS.: | The vertical position of the video image being projected is adjusted. |
| H. POS.: | The horizontal position of the video image being projected is adjusted. |
|
|
|
PICTURE | BRIGHTNESS: | The brightness of the video image being projected is adjusted. |
| CONTRAST: | The contrast of the video image being projected is adjusted. |
| The gain in red signal of the video image being projected is adjusted. | |
| The gain in green signal of the video image being projected is adjusted. | |
| The gain in blue signal of the video image being projected is adjusted. | |
| TEXT MODE: | Adjust easiness for reading text during RESIZE. |
|
| NORMAL: Normal |
|
| TEXT 1: Display the outline of small letters already. |
|
| TEXT 2: Makes the outline of large letters sharp. |
| ALL RESET: | All the items adjusted are reset. |
|
|
|
OPTIONS | MENU AUTO OFF: | Sets whether to turn off menu display automatically (YES) or not (NO). |
| LINE DISPLAY: | Sets whether to make the line display effective (ON) or not (OFF) for about 5 seconds |
|
| after input switching. |
| RIGHT LEFT REV.: | Image is reversed |
| TOP BOTTOM INV.: | Image is inverted |
| CLAMP: | Sets the clamp pulse’s position at the back porch (BP) or on the sink tip (ST). Normally, |
|
| the clamp pulse is used at BP. If, with some PCs or workstations, the screen becomes |
|
| unstable such as being too dark or too bright, try to switch to ST. |
| RESIZE: | When the number of pixels (resolution) sought by the video image input is smaller than |
|
| that (resolution) of |
|
| size of |
| BACK COLOR: | Specifies the background color when there is no image signal. Background color can be |
|
| selected from BLUE, CYAN, BLACK, GREEN, MAGENTA, RED, and YELLOW. |
| COLOR TEMP.: | Adjusts the color temperature of the video image being projected. Make adjustment when |
|
| the video image becomes reddish or bluish. |
|
| Color temperature can be set to LOW, MIDDLE, or HIGH. |
| ASPET CHANGE: | Selects the |
|
| is 4 : 3. When projecting |
| SLEEP TIME: | Sets the length of sleep time. A set sleep time after input signal is depleted, the projector |
|
| goes into a |
|
| minutes, 60 minutes and 0 minute. (If you select 0 minutes, the sleep time will be |
|
| cleared.) |
| LAMP TIME: | Indicates accumulated used hours of the |
|
| |
SOURCE: | Normally used in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or | |
| the screen being intermitted, set to the dedicated source (forced mode) in accordance with the input signal. | |
| USER allows you to set a source which is uniquely adjusted by the user. | |
|
| |
CHANNEL: | Sets a line and multiple sources for each channel. |
USER SOURCE SET Sets up an area for the source being input, and registers the user name.
UP:
DISPLAY SIZE: | Adjusts H PIXEL, V PIXEL, H CENTER and V CENTER of video image. |
|
|
DECODER: | Does not work with |
|
|
LANGUAGE: | Text on the screen can be changed to a language other than English. Languages that can be displayed are the |
| following six: N(Japanese), ENGLISH (English), DEUTSCH (German), ESPAÑOL (Spanish), ITALIANO |
| (Italian), and FRANÇAIS (French). However, some text such as |
| are shown only in English. |
|
|
31
ESPAÑOL ITALIANO FRANÇAIS DEUTSH ENGLISH