JVC DR-MX1S Automatic Satellite Program Recording, HDD, REC MODE, REC LINK, VHS/HDD/DVD SELECT

									TIMER RECORDING ON HDD/DVD DECK EN 59
	Automatic Satellite Program Recording
								●	VIDEO/AUDIO INPUT L-1] connectors.
									Make sure the DBS receiver is connected to the unit’s [S-VIDEO/
	(HDD Deck Only)							● Program the timer on the DBS receiver.
								● Slide the TV/CABLE/DBS/DVD switch to DVD.
								1 Press HDD on the remote to choose the recording deck. You
This function allows you to automatically record a satellite program
which is timer-programmed on your external DBS receiver.								can also press VHS/HDD/DVD SELECT on the unit repeatedly to
Connect a DBS receiver to the unit’s [S-VIDEO/VIDEO/AUDIO								select the recording deck.
INPUT L-1] connectors and program the timer on the DBS								2 Press REC MODE repeatedly to set the recording mode.
receiver. The unit starts or stops recording by the signals input								3 Press and hold REC LINK for about 2 seconds to engage the
from the DBS receiver. After recording, the unit’s power shuts off
								Automatic Satellite Program Recording mode. “ ” and “R-LK”
automatically.
								appear on the front display panel.
● You can also connect the cable box if it has a timer.
								NOTES:
ATTENTION:								● To disengage the Automatic Satellite Program Recording mode,
● Be sure not to turn on the DBS receiver before the program is								press REC LINK.
	executed; otherwise, the unit will start recording when the DBS							● If the unit’s power is off, it is not possible to engage the Automatic
	receiver’s power is turned on.							Satellite Program Recording mode.
● If you have connected another appliance other than a DBS								● In step 3, if “ ” blinks quickly on the front display panel even though
	receiver to the [S-VIDEO/VIDEO/AUDIO INPUT L-1] connectors,							your DBS receiver’s power is off, Automatic Satellite Program
	be sure not to engage the Automatic Satellite Program Recording							Recording will not work properly with that DBS receiver*. If this is the
	mode; otherwise, the unit will start recording when the connected							case, perform “Manual Timer Programming” ( pg. 57) to
	appliance’s power is turned on.							timer-record a satellite program.
● Automatic Satellite Program Recording and timer-recording cannot								* Some DBS receivers output signals even if the power is off. Automatic
	be done at the same time.								Satellite Program Recording is not possible with those DBS receivers.
								● “	” blinks on the front display panel while Automatic Satellite
			VHS/HDD/DVD					Program Recording is in progress.
								● For timer programming of the DBS receiver, refer to the instruction
				SELECT				manual of the DBS receiver.
								● Automatic Satellite Program Recording is not possible if your DBS
								receiver does not have a timer.
								● Pressing the unit’s 1 button while Automatic Satellite Program
								Recording is in progress turns off the unit’s power and disengages
								the Automatic Satellite Program Recording mode.
								● If there are more than one satellite programs you wish to record with
						REC MODE		Automatic Satellite Program Recording, it is not possible to set
								different recording modes for each program.
					CABLE/DBS			● Depending on the type of DBS receiver, the unit may not record a
								slight portion of the beginning of the program or may record slightly
					TV		DVD
		HDD						longer than the actual length of the program.
								● If you engage the Automatic Satellite Program Recording mode when
								the DBS receiver’s power is on, the unit will not start Automatic
								Satellite Program Recording even though “ ” blinks on the front
								display panel. When the DBS receiver shuts off once and is turned
								back on again, the unit starts recording.
								● You can also record a program from your cable system in the same
								way if the system has a timer.

REC MODE

REC LINK