GENERAL
Power requirementAC 120 Vd, 60 Hz
Power consumptionPower on: 49 W
Power off: 16.2 W
TemperatureOperating: 5°C to 35°C (41°F to 95°F)
Storage:
Horizontal only
Dimensions (WxHxD)435mm x 96 mm x 383 mm
6.7 kg (14.8 lbs)
Input/OutputVideo input: 0.5 – 2.0
Audio input:
Corresponding to mono (left) Audio output:
IN x 3, OUT x 2
Input/Output (HDD & DVD Deck Only)Y:0.8 – 1.2
C:0.2 – 0.4
Y:1.0
C:0.3
i.Link:
Y: 1.0
CB/CR, PB/PR: 0.7
Cable Box: R3.5mm Digital audio output:
Optical:
Coaxial: 0.7
Corresponding to Dolby Digital and DTS Digital Surround Bit stream
Selectable in digital audio output setting menu
VIDEO/AUDIO (DVD Deck)
Recording timeMaximum 8 hours (with 4.7 GB disc) (XP): Approx. 1 hour
(SP): Approx. 2 hours
(LP): Approx. 4 hours
(EP): Approx. 6 hours
(FR): Approx. 1 hour – 8 hours
Audio recording systemDolby Digital (2 ch)
Linear PCM (XP mode only)
Video recording compression systemMPEG2 (CBR/VBR)
VIDEO/AUDIO (HDD Deck)
Video recording compression system
MPEG2 (VBR)
Audio recording system
Dolby Digital (2 ch)
Linear PCM (XP mode only)
Recording time
Maximum 147 hours (with 80 GB HDD) (XP): Approx. 18 hours
(SP): Approx. 35 hours
(LP): Approx. 70 hours
(EP): Approx. 105 hours
(FR): Approx. 18 – 147 hours
VIDEO/AUDIO (VHS Deck)
Signal systemNTSC color signal and EIA monochrome signal, 525 lines/60 fields
Recording systemDA4 (Double Azimuth) head helical scan system
FormatVHS NTSC standard
Maximum recording time(SP): 210 min. with
(EP): 630 min. with
45 dB
Horizontal resolution230lines
Frequency range(Normal audio): 70 Hz to 10,000 Hz
Specifications shown are for SP mode unless otherwise specified.
TUNER/TIMER
Tuning systemFrequency synthesized tuner
Channel coverageVHF: Channels 2 – 13
UHF: Channels 14 – 69
CATV: 113 Channels
RF outputChannel 3 or 4 (Switchable; preset to Channel 3 when shipped) 75 C, unbalanced
Memory backup timeApprox. 60 minutes
ACCESSORIES
Provided accessories RF cable x 1, Audio/Video cable, Satellite Controller, Infrared remote control unit, “AA” battery x 2
E.& O.E. Design and specifications subject to change without notice.
ATTENTION:
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the disc. After checking the disc, operate the unit as usual.