JVC DR-MX1S DV Dubbing (HDD & DVD Deck Only), HDD, ENTER, ENTER, ENTER, ENTER, ENTER, ENTER, ENTER, CH +/–, NOTES:, NOTES:, REC MODE, ON SCREEN, camcorder, 74 EN EDITING

74 EN EDITING

DV Dubbing (HDD & DVD Deck Only)

1 Connect a camcorder or DV equipment to the [DV IN] connector

on the unit’s front panel.

2 Press VHS/HDD/DVD SELECT on the unit repeatedly or HDD

You can dub programs from a camcorder or DV equipment

on the remote so that the HDD lamp lights up on the unit.

connected to the unit with a DV cable. The unit’s remote control

3 Press CH +/– to set the channel to “DV”.

allows you the limited control of the connected camcorder or DV

equipment functions during dubbing.

4 Press ON SCREEN.

● The on-screen display for DV dubbing appears.

NOTES:

5 Press w e to select

, then press ENTER to display

● Use the DV cable VC-VDV 204U for connection.

the remote icon (facing to the right) for the DV equipment.

● When you connect a PC to the DV IN connector, we do not assure

6 Press REC MODE repeatedly to set the recording mode.

the normal operation of this unit.

7 Locate the point from where you want to start dubbing, then

Your unit

stop or pause playback by pressing the following buttons on the

remote control: 4, 5, 3, 8, 9.

● To play back in slow speed (1/10 of the normal speed), press 9 to

pause playback, then press 3 or 5.

● To play back frame-by-frame, press 9 to pause playback, then press

9 repeatedly. Each press of 9 advances a frame.

● To change the playback direction, press 3 or 5.

8 Press w e to select

, then press ENTER repeatedly

To [DV IN]

until the desired sound track appears on the TV screen.

AUDIO 1: Select this to record the original stereo sound played

back on the connected DV equipment.

AUDIO 2: Select this to record the dubbed stereo sound played

back on the connected DV equipment.

Camcorder

MIX: Select this to record the sound of both “AUDIO 1” and

DV cable

“AUDIO 2”.

(VC-VDV 204U)

● Note that this selection is not available when the source program is

(not supplied)

recorded in 16BIT (48 kHz) mode.

9 Press w e to select

, then press ENTER. The

dubbing starts.

● Playback on the external DV equipment and recording on the unit

should start simultaneously.

DV equipment

DV connector

● To pause dubbing, press w e to select

, then press

ENTER. Both the unit and the external DV equipment pause

dubbing. Pressing 9 on the unit also works the same way.

10 Press w e to select

, then press ENTER. Then

press 8. The DV equipment stops.

11 Press w e to select

, then press ENTER.

12 Press 8 twice on the

remote control to stop dubbing.

The following on-screen display for DV dubbing appears when

● Both the unit and the external DV equipment stop dubbing.

ON SCREEN is pressed while the channel has been set to “DV”.

NOTES:

0:00

1:00

2:00

DV

● Dubbing copyright guarded programs is not possible.

HDD

GR-DV3500

● Original DV information such as the recording date and time are not

FR360

00:00:00. 00

00:00:00. 00

L – R

12bit

DVJVC

GR-DV3500

SOUND1

recorded.

● The superimposed indication during the operation or dubbing is not

recorded.

● If the dubbing is paused while the channel is set to “DV”, you cannot

switch channels.

DV

DV

1 2

When you dub from DV equipment other than a

A

B

C

camcorder

A Remote control switch

A Perform step 1 to 4.

To switch between the devices operable by the remote control

B Locate the point from where you want to start dubbing, then

unit. The unit is operable when the remote icon (

)

stop on the DV equipment.

displayed faces to the left, while the DV device is operable

● If you pause the DV equipment in this step, a few second’s still

when the remote icon is facing to the right.

picture will be recorded at the beginning of the recorded program.

B Auto capture button

C Set the input mode to “DV INPUT” on the DV equipment.

Select to start or pause the dubbing. If ENTER is pressed when

● If you select an input mode other than “DV INPUT”, unwanted

the DV device is in the pause condition, preroll editing* where it

pictures may be recorded at the beginning of the recorded

is possible to dub with a start time that is highly accurate will be

program.

activated. When the DV device cannot be operated from the

D Perform step 9 to 12.

unit (such as in camera mode), proceed with normal recording

To skip unwanted part of the source picture

( pg. 41, 44).

* Preroll editing refers to the playback after the DV tape is slightly

Press ENTER to stop both equipment, then press w e to select

rewind. (For DV devices that do not support the –1 speed, the

.

rewinding time may be longer.)

4

C Sound monitor switch

Locate the point where you want to restart dubbing by pressing ,

5

, or

3

8

For selecting the desired sound format for recording. It is not

, then press .

Press w e to select

, then press ENTER to restart

selectable during dubbing.

dubbing.