|
|
| TIMER RECORDING ON HDD/DVD DECK EN 57 | ||||||||
|
|
|
|
|
|
|
| ||||
|
| Manual Timer Programming | 8 Press rt to select “SOURCE”, then press ENTER. Press rt | ||||||||
|
| ||||||||||
|
| to select the desired source, then press ENTER. |
|
|
|
| |||||
|
|
| ● To select the desired source, the respective settings must be set, | ||||||||
You can program this unit to | |||||||||||
refer to ‘Source Selection’ ( pg. 57). |
|
|
|
|
| ||||||
32 programs. | 9 Press rt to select “CH”, then press ENTER. Press rt to | ||||||||||
If you do not know the VCR Plus+ number for the program you | select the desired channel. |
|
|
|
|
| |||||
wish to record, use the following procedure to set your unit to |
|
|
|
|
| ||||||
10 Press rt to select “CONFIRM”, then press ENTER. |
|
| |||||||||
|
| ||||||||||
|
|
| 11 Set the other recording options as required. |
|
|
|
| ||||
● Make sure that the unit’s | ● Refer to step 8 in “VCR Plus+ C3® Timer Programming” ( pg. 55). | ||||||||||
● Turn on the unit. | 12 Press rt to select “OK”, |
|
|
|
|
|
|
| |||
● Turn on the TV and select the video channel (or AV mode). |
|
| 2 PROGRAM > CALENDAR PROG. (3/3) | ||||||||
| |||||||||||
then press ENTER to access the |
|
|
|
|
|
|
| ||||
● Slide the TV/CABLE/DBS/DVD switch to DVD. |
|
| 01/08/03 WED 10:30PM - 11:00PM | DBS 100 |
| ||||||
Program Confirmation screen. |
|
| GARDENING | [EDUCATION] FR360 |
| ||||||
|
|
|
|
|
| 1:00 | 28:00 |
| |||
|
|
|
|
|
|
|
|
|
|
|
CABLE/DBS
TVDVD
PROGRAM
ENTER
rtwe
1 Load a recordable disc if recording to DVD.
2 Press PROGRAM to access the program top screen.
3 Press rtw e to select “CALENDAR PR.”, then press ENTER.
●When “PROGRAM FULL DELETE UNWANTED TIMER PROGRAMS” appears on the TV screen, you need to cancel some of the reserved programs. ( pg. 58)
4 Press rtw e to select the desired date, then press ENTER.
5 Press rt to select “RECORD |
|
|
|
|
|
|
|
|
| |
|
|
|
| PROGRAM > CALENDAR PROG. (2/3) | ||||||
|
|
| 2 | |||||||
TO”, then press ENTER. Press |
|
|
|
|
|
|
|
|
| |
|
|
| 01/08/03 WED | 10:30PM - 11:00PM DBS 100 |
| |||||
rt to select the desired |
|
|
|
|
|
|
|
| [MISC. ] XP |
|
|
|
|
|
|
|
|
|
|
| |
recording deck, then press |
| SELECT WITH [ ] |
| RECORD TO |
| HDD |
| |||
ENTER. |
| THEN PRESS [ENTER] |
| START |
| 10:30PM |
| |||
| PRESS [PROGRAM] |
| STOP |
| 11:00PM |
| ||||
6 Press rt to select “START”, |
| TO EXIT |
|
|
|
|
|
|
|
|
|
|
|
| SOURCE |
| DBS |
| |||
|
|
|
| CH |
| 100 |
| |||
then press ENTER. Press rt to |
| PROGRAM | ENTER |
|
|
|
|
|
| |
|
|
|
| O K | ||||||
set the desired start time, then |
| EXIT | SELECT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
press ENTER.
●Each press of rt increases/decreases the start time in
●To increase/decrease the start time in
7 Press rt to select “STOP”, then press ENTER. Press rt to set the desired stop time, then press ENTER.
●Each press of rt increases/decreases the stop time in
●To increase/decrease the stop time in
13 Press w e to select “EXIT”, | SELECT WITH [ ] | INPUT TITLE | GARDENING | |
THEN PRESS [ENTER] | CATEGORY | EDUCATION | ||
then press ENTER to complete | PRESS [PROGRAM] | WEEKLY/DAILY | ||
TO EXIT |
|
|
| |
timer programming. |
|
| REC MODE | FR360 |
|
|
|
| |
● To program another timer, press | PROGRAM | ENTER |
| O K |
EXIT | SELECT |
| ||
w e to select “CONTINUE”, then |
|
| ||
|
|
|
|
press ENTER.
●If “PROGRAM OVERLAPPED” appears on the TV screen, see page 58.
NOTES:
●When two successive programs are recorded on a
●If the copy limited program is received during
Cable Box and DBS Receiver Users
To
APerform “Cable Box and/or DBS Receiver Control Setting (HDD & DVD Deck only)” ( pg. 24).
B Perform “Manual Timer Programming” ( pg. 57). C Leave the cable box or DBS receiver’s power on.
Relief RecordingWhen a program that is set for the DVD deck cannot be recorded properly, the program is recorded to the HDD deck instead in XP mode.
●If the remaining capacity of the hard disc is not sufficient, the program is recorded to the DVD deck until the remaining capacity of the DVD disc lasts.
●If “JUST” is selected for the recording mode, the current recording mode for the DVD deck is applied.
Source SelectionTo select the desired source (TV, CATV, DBS or AUX), the respective settings must be set as follows:
“TV”: The “CABLE BOX OUTPUT CHANNEL” setting on the “CABLE SET UP” screen must be set to “OFF” ( pg. 24), and the “BAND” setting on the “MANUAL CH SET” set to “TV” ( pg. 23).
“CATV”: The “CABLE BOX OUTPUT CHANNEL” setting on the “CABLE SET UP” screen must be set to other than “OFF” ( pg. 24), or the “BAND” setting on the “MANUAL CH SET” set to “CATV” ( pg. 23).
“DBS”: The “DBS SET UP” setting on the “STB SET” screen must be set to other than “OFF” ( pg. 24).
“AUX”: Always selectable.