VCR Plus+® Timer Programming | 7 Press REC MODE to select the desired recording mode. | ||
8 Press ENTER to complete timer programming. | |||
You can program this unit to | |||
● If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears | |||
With the VCR Plus+ system, timer programming is greatly | on the TV screen, see page 62. | ||
simplified because each TV program has a corresponding code | 9 Press VHS TIMER to engage the unit’s timer mode. The VHS | ||
number which your unit is able to recognize. |
| recording lamp lights up on the unit and the HDD or DVD deck is | |
You can use the remote control to enter the PlusCode number. | |||
automatically selected. When the HDD or DVD deck is in timer | |||
|
| ||
● Make sure that the unit’s |
| standby mode, the unit is automatically turned off. | |
| ● To disengage the timer mode, press VHS TIMER again. | ||
● Turn on the unit. |
| ||
|
| ||
● Turn on the TV and select the video channel (or AV mode). |
| ||
● Slide the TV/CABLE/DBS/DVD switch to DVD. |
| IMPORTANT: | |
|
| If you have moved to a different area or if a broadcasting station’s | |
CABLE/DBS | channel number has been changed, the wrong channel number will | ||
TV | DVD | be displayed on the VCR Plus+ program screen in step 6. When this | |
VHS TIMER |
| happens, set the correct Guide Channel number for that station. | |
VHS |
| ||
| NOTES: | ||
|
| ● To | |
CANCEL |
| — in step 6, press number key “9” for weekly serials or number key | |
| “8” for daily serials (Monday - Friday). Either “WEEKLY” or “DAILY” | ||
PROGRAM |
| appears on the TV screen. Pressing the button again makes the | |
|
| corresponding indication disappear. | |
rt |
| ● You can program this unit to | |
ENTER |
| you try to program the unit to record a ninth, “PROGRAM FULL” | |
| appears on the TV screen and “FULL” appears on the front display | ||
|
| ||
|
| panel. To record the extra program, you must first cancel any | |
|
| ||
|
| ● To record the programs received by cable box or DBS receiver, | |
|
| record on the HDD or the DVD discs. For details, refer to “VCR Plus+ | |
REC MODE |
| ||
|
|
1 Load a cassette with the record safety tab intact.
2 Press VHS so that the VHS lamp lights up on the unit.
3 Press PROGRAM to access the Program screen.
4 Press rt to select “VCR PLUS+ PRGM”, then press
ENTER.
5 Press the number keys to enter the PlusCode number of a program you wish to record, then press
ENTER.
●If you have made a mistake, press
CANCEL and input the correct number before you press ENTER.
● If the number you entered is invalid, “ERROR” appears on the TV
screen and “Err” appears on the front display panel. Press CANCEL and input a valid PlusCode number.
6 The PlusCode number you entered and the matching timer- recording information are displayed on the TV screen. Check the program data.
●To cancel this setting, press
PROGRAM.
PROGRAM 1
(PLUSCODE NO. 12345678)
START |
| STOP | |||||||
12:00 AM |
|
|
|
| 1:00 AM |
|
| ||
DATE |
|
|
|
| CH | SP/EP | |||
1/ 30/04 |
|
|
| 15 |
| SP |
|
PRESS (8=DAILY, 9=WEEKLY
R/T, REC MODE), THEN (ENTER)
(PROGRAM) TO END
IMPORTANT:
Make sure the channel position number you wish to record is displayed; if not, see “Changing VCR Plus+® Setting” ( pg. 86) and set the Guide Channel number correctly.