BASIC OPERATIONS ON DVD DECK EN 43

Free Rate Function

NOTES:

 

 

● You can program this unit to timer-record, regardless of the disc

To record the entire program, the unit automatically sets the

remaining time. When the disc remaining time is not enough, the unit

appropriate recording mode depending on the combination of the

performs “Relief Recording” ( pg. 57). To avoid this, make sure of

total time of the program to be recorded and either the remaining

the disc remaining time before setting timer programming.

disc space or the specified recording time (from 60 minutes to 480

(Example) If you programmed to timer-record for 60 minutes in SP

minutes).

mode on a 120-minute disc, the disc remaining time would be 30

8 To record the entire program within the actual remaining

minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP

disc space (DVD deck only)

mode, 180 minutes in EP mode, and 240 minutes in FR480 mode.

Select “FR (JUST)” in a recording mode selection procedure.

Timer-recording will not complete beyond these remaining times.

● Note that this function is available only for timer programming

● The maximum recording time of FR (JUST) mode is the same as the

recording time of FR480 mode. When timer programming a long

recording ( pg. 55, 57) and dubbing from HDD to DVD ( pg. 70).

program in FR (JUST) mode on a disc whose remaining time is short,

8 To record the entire program by specifying the desired

recording time

it is recommended to check the disc remaining time in FR480 mode

to see if the remaining time is enough for the program.

Select “FR60–FR360”, “FR420” or “FR480” in a recording mode

● Even if more than one program are timer programmed in FR (JUST)

selection procedure. ( pg. 41, 44, 55, 57)

mode, only the first one is recorded.

8 To record a 25-min. long daily program five times just on

● In order to ensure that the recording fits on the disc, this feature may

the same DVD disc for example

leave a slight non-recorded section at the end of the disc.

Perform “VCR Plus+ C3® Timer Programming” ( pg. 55)

procedure. Be sure to set the recording mode to “FR125” and set

● There may be some noise and sound disturbance at the point on the

disc where the unit switches the mode.

Weekly/Daily Rec Function to “MON–FRI” in step 8 to fit the total

Second Audio Recording

recording time to the whole disc space.

A: 1st

B: 2nd

BlankC: 3rd

D: 4th

E: 5th

When the same program is recorded in SP mode instead of in “FR125”, the 5th program cannot be recorded.

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”. ( pg. 82)

NOTE:

When the channel is changed on the unit;

● The “MONO” indicator appears on the screen for about 5 seconds if

the program is a monaural broadcast.

● The “STEREO” indicator appears on the screen for about 5 seconds

if the program is a stereo broadcast.

● Both “STEREO” and “SAP” indicators appear when a stereo program

Blank

A: 1st

B: 2nd

C: 3rd

D: 4th

E: Blank (20 min.)

is accompanied by SAP sound.

● Both “MONO” and “SAP” indicators appear when the main audio on

the monaural broadcast is accompanied by SAP sound.