|
|
|
| SUBSIDIARY SETTINGS EN 83 | |
|
|
|
| Scan Mode Set |
|
|
|
| |||
8 DIMMER — BRIGHT / DIMMED | |||||
You can change the brightness of the front display panel. |
|
|
|
|
|
| If you connect the unit and TV with Component Video Connection | ||||
BRIGHT: Normally select this. |
| ||||
DIMMED: To dim the front display panel. (Blue lamp on the front |
| ||||
display panel is turned off.) |
| Interlaced scan mode which is used in the conventional TV | |||
| system, and Progressive scan mode which enables reproduction | ||||
|
| ||||
8 POWER SAVE — OFF / ON |
| of | |||
| 8 Interlaced scan | ||||
When this function is set to “ON”, you can reduce the power |
| ||||
consumption while the unit is turned off. |
| In the conventional video system, a picture is shown on the display | |||
● During Power Save mode — |
| monitor in two halves. The Interlaced scan system places lines of the | |||
— the front display panel will be turned off. |
| second half of the picture | |||
● Power Save does not work when — |
| 8 Progressive scan | |||
— the unit is in the Timer mode. |
| ||||
| Progressive scan displays all the horizontal lines of a picture at one time, | ||||
— the unit’s power is turned off after |
| ||||
Recording. |
| as a single frame. This system can convert the interlaced video from DVD | |||
— the Automatic Satellite Program Recording mode is engaged. |
| into progressive format for connection to a progressive display. It | |||
| dramatically increases the vertical resolution. | ||||
●It takes some time for the unit to complete initialization after you turn
on the unit power, with “WAKE UP” blinking on the front display |
| ATTENTION: |
panel. |
| Your TV needs to be compatible with Progressive. |
|
| |
|
|
|
8ON SCREEN LANGUAGE
This unit offers you the choice to view
For details, refer to
8MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX
You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for
8FRONT AUX F-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector
VIDEO: To use the [VIDEO] input connector on the front panel.
8REAR AUX L-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector
VIDEO: To use the [VIDEO INPUT] connector on the rear panel.
.
●Turn on the unit.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/CABLE/DBS/DVD switch to DVD.
CABLE/DBS
TV | DVD |
HDD | DVD |
|
PROGRESSIVE SCAN
1Press HDD or DVD so that the HDD or DVD lamp lights up on the unit.
2Press PROGRESSIVE SCAN for 3 or more seconds.
●Video output indicator (
) lights on the front display panel if Progressive scan mode has been established. ( pg. 14)
●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.
NOTES:
●Interlaced scan mode is the setting at your purchase.
●Interlaced scan mode might be suitable depending on video material.
●Scan mode cannot be set while menu screen is displayed.
●When the Progressive scan mode is engaged, no video signal is output from
Watch the images on VHS deck in the Progressive scan mode via component video
1Set the
2Press HDD or DVD so that the HDD or DVD lamp lights up on the unit.
3Press PROGRESSIVE SCAN for 3 or more seconds.
●The video output indicator 
lights up on the front display panel.
4 Press VHS so that the VHS lamp lights up on the unit, then press
PROGRESSIVE SCAN.
●“COMP OFF” is displayed on the front display panel. It will be displayed for 5 seconds.
5 Press PROGRESSIVE SCAN again within 5 seconds.
●“COMP ON” is displayed on the front display panel.
●The VHS progressive scan image will then be outputted from the [COMPONENT VIDEO OUT (Y/PB/PR)] connectors.
NOTES:
●Be sure to engage the HDD or DVD deck in stop mode.
●To disengage the VHS Progressive Scan mode, perform steps 4 and 5 to switch to “COMP OFF”.