76 EN EDITING

 

 

Edit To Or From Another Recorder

 

Slide the TV/CABLE/DBS/DVD switch to DVD.

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Make connections.

You can use your unit as the source player or as the recording

 

A When recording on HDD or DVD deck

deck.

 

 

1. If another recorder has no S-VIDEO connector, connect the unit’s

 

 

 

 

NOTE:

[AUDIO/VIDEO INPUT] connectors to the audio/video output

When using another recorder as the recording deck, refer to its

connectors on another recorder.

instruction manual.

2. If another recorder has S-VIDEO connector, connect the

A When recording on HDD or DVD deck

[AUDIO INPUT] and [S-VIDEO INPUT] connectors to the audio and

S-video output connectors on another recorder.

Your unit

● If connecting a unit with an S-VIDEO connector, it is recommended to

use an optional S-Video cable to minimize picture degradation while

 

editing.

 

B When recording on VHS deck

Recorder

TV receiver

1.Connect the unit’s [AUDIO/VIDEO INPUT] connectors to the audio/ video output connectors on another recorder.

2 Press VHS/HDD/DVD SELECT on the unit repeatedly to select the recording deck.

3 Press CH +/– to select “L-1” when using this unit as the recording deck.

For HDD/DVD deck

●Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, or “S-VIDEO” for the S-VIDEO input connector, depending on the

 

connector being used. ( pg. 83)

 

4 Press REC MODE repeatedly to set the recording mode.

 

5 Engage the Play mode of the source player.

 

6 Engage the Record mode of the recording deck.

Another recorder

7 Stop recording on the recording deck, then stop playback on the

 

source player.

Player

BWhen recording on VHS deck

Your unit

.

Recorder

TV receiver

NOTES:

●All necessary cables can be obtained from your dealer.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 82)

Another recorder

Player