JVC GD-V501PCE manual Setup of Screensaver Time, Side Panel Adjustment

Screensaver (For preventing after-images )

Setup of Screensaver Time

5

Screensaver

Function	White bar scroll
Mode	Time Designation
Start Time		0:00
Finish Time		0:00
SP Adjustment			Mid

6

Press to select Start Time/ Finish Time (When Time Designation is selected).

Press to select Periodic Time/ Operating Time (When Interval is selected).

Press to select each Time

Adjustment screen.

Screensaver

Function	White bar scroll
Mode	Interval
Periodic Time	0:00
Operating Time	0:00
SP Adjustment	High

Press to select Hours Adjustment/ Minutes Adjustment.

Press to Setup Hours or Minutes.

button: Forward button: Back

Press to store settings.

Start Time
Start Ttime	0 : 00
Hours Adjustment	00
Minutes Adjustment	00
Finish Time
Finish Time	0 : 00
Hours Adjustment	00
Minutes Adjustment	00
Periodic Time
Periodic Time	0:00
Hours Adjustment	00
Minutes Adjustment	00
Operating Time
Operating Time	0 : 00
Hours Adjustment	00
Minutes Adjustment	00

Note: Timer function will not work unless “PRESENT TIME” is set.

Side Panel Adjustment

Do not display a picture in 4:3 mode for an extended period, as this can cause an after-image to remain on the side panels either side of the display field.

To prevent the appearance of such an after-image, illuminate the side panels.

1	To display the Screensaver screen.
	(Refer to the previous page, operation
	guide steps 1 and 2.)

side panel

4:3 Screen Display

after-images

2

3

Press to select the SP Adjustment.

Press to select Off, Low, Mid, High.

Off Low Mid High

R

Press to exit from Screensaver.

Screensaver

Function	White bar scroll
Mode	Time Designation
Start Time		0:00
Finish Time		0:00
SP Adjustment			Mid

Notes:

•Setting the side panel to High mode for an extended period may result in occurrence of after-images.

•The side panels may flash (alternate black/white) depending on the picture being shown on the screen. In such an occurrence, use the Cinema mode.

29