JVC GD-V501PCE manual Colour system / Aspect Auto, Pulldown, Setup for Input Signals

Setup for Input Signals
Colour system / Aspect Auto
Select Signal from the “Setup” menu during AV(S Video) input	Setup
signal mode. (“Signal [AV]” menu is displayed.)
	Component/RGB-in select		RGB
Press to select the “Colour system” or		Signal
“Aspect Auto”.	OSD Language	Screensaver	English (UK)
Press to select each functions.		Set up TIMER
If the picture image becomes unstable:	Press	(ACTION) button
With the system set on Auto, under conditions of	Signal		[ AV ]
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,	3D Y/C Filter (NTSC)		On
set the system to match the format of the input	Colour system		Auto
signal.	3:2 Pulldown		Off
	Aspect Auto (4:3)		4 : 3

Mode			Function
Colour system	Set the colour system to match that of the input signal.
	If set to “Auto”, the colour system is automatically selected from “PAL”, “SECAM” and
	“NTSC”, but not from “M-NTSC”. To view M-NTSC format pictures, you must manually
	set to “M-NTSC”.	Auto	PAL	SECAM	M.NTSC	NTSC
Aspect Auto	Set to “4 : 3” to view 4:3 images in an unchanged format when Aspect Auto is selected.
(4:3)	If you would like to view 4:3 images in Just format, set to “Just”.

3:2 Pulldown

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to off.

Select “Signal” from the “Setup” menu during AV(S Video) or Component input	Setup
signal mode.(“Signal [AV]” menu is displayed.)	Component/RGB-in select		RGB
Press to select 3:2 Pulldown.		Signal
		Screensaver	English (UK)
	OSD Language
Press to set On/Off.		Set up TIMER
	Press	(ACTION) button
	Signal		[ AV ]
Note:	3D Y/C Filter (NTSC)		On
When On, this setting only affects the following signal input.	Colour system		Auto
• NTSC signal input during “AV(S Video)” input signal mode.	3:2 Pulldown		Off
	Aspect Auto (4:3)		4 : 3
• 525i(480i) signal input during “Component” input signal mode.
R	Signal		[ Component ]
Press to exit from adjust mode.	3:2 Pulldown		Off
			31