JVC GET0570-001A manual External Devices

Registering using “OPEN”

Preparation: Operate the device to turn on its Bluetooth function.

1Select “BT-PHONE” or “BT-AUDIO.”

2Select “NEW DEVICE.”

3Select “OPEN.”

4Enter a PIN (Personal Identification Number) code to the unit.

•You can enter any number you like (1-digit to 16-digit number). [Initial: 0000]

*Some devices have their own PIN code. Enter the specified PIN code to the unit.

1Move to the next (or previous) number position.

2Select a number.

3Repeat steps 1and 2until you finish

entering a PIN code.

4Confirm the entry.

“OPEN..” flashes on the display.

5 Use the Bluetooth device to search and
connect.	ENGLISH
On the device to be connected, enter the same
PIN code you have just entered for this unit.
“CONNECTED” appears on the display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use “CONNECT“ (or activate
“AUTO CNNCT”) to connect the same device from
next time on. (See the following and page 22.)
Connecting a device
Perform steps 1 and 2 on left column, then...

1• Select “SEARCH” to search for available devices.

The unit searches and displays the list of the available devices. If no available device is detected, “UNFOUND” appears.

•Select “SPECIAL” to connect a special device.

The unit displays the list of the preset devices.

2Select a device you want to connect.

3• For available devices...

Enter the specific PIN code of the device to the unit.

Refer to the instructions supplied with the device to check the PIN code.

Use the Bluetooth device to connect.

Now connection is established and you can use the device through the unit.

•For special device...

Use “OPEN” or “SEARCH” to connect.

Continued on the next page

EXTERNAL DEVICES 11