JVC GET0570-001A manual Making a call

ENGLISH

Connecting/disconnecting/deleting a registered device

1Select “BT-PHONE” or “BT-AUDIO.”

2Select a registered device you want to connect/disconnect/delete.

3• Select “CONNECT” or “DISCONNECT” to connect/disconnect the selected device.

•Select “DELETE,” then “YES” to delete the selected device.

You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “AUTO CNNCT” on page 22.)

Using the Bluetooth cellular phone

1

2

3

—

Select “BT-PHONE.”

Enter the Bluetooth menu.

Make a call or setting using the Bluetooth setting menu. (See the following and page 22.)

When a call comes in....

The source is automatically changed to “BT-PHONE.”

•The display will flash in blue (see “RING COLOR” on page 24 for setting.)

When “AUTO ANSWER” is activated....

The unit answers the incoming calls automatically, see page 22.

•When “AUTO ANSWER” is deactivated, press any

button (except //0) to answer the incoming call.

•You can adjust the microphone volume level (see page 22).

To end the call

Hold any button (except //0).

When a text message comes in....

If the cellular phone is compatible with text message (notified through JVC Bluetooth adapter) and “MSG INFO” (message info) is set to “AUTO” (see page 22), the unit rings to inform you of the message arrival.

•“RCV MESSAGE” (receiving message) appears on the display and the display illuminate in blue (see “RING COLOR” on page 24 for setting).

Making a call

You can make a call using the following methods.

Select “BT-PHONE,” then follow the following steps to make a call:

• To return to the previous menu, press BACK.

1Enter the “DIAL” menu.

12