JVC GET0570-001A manual FADER*9

Category	Menu items	Selectable settings, [reference page]
	FADER*9	R06 – F06		: Adjust the front and rear speaker output balance.
	Fader			[Initial: 00]
	BALANCE*10	L06 – R06		: Adjust the left and right speaker output balance.
	Balance			[Initial: 00]
	LOUD	•	LOUD OFF	: Cancels.
	Loudness	•	LOUD ON	: Boost low and high frequencies to produce a
				well-balanced sound at a low volume level.
	VOL ADJUST	VOL ADJ –05 —		: Preset the volume adjustment level of each source (except
	Volume adjust	VOL ADJ +05		FM), compared to the FM volume level. The volume level
		[Initial: VOL ADJ 00]		will automatically increase or decrease when you change
				the source.
				• Before making an adjustment, select the source you
				want to adjust.
				• “VOL ADJ FIX” appears on the display if “FM” is selected
AUDIO				as the source.
	L/O MODE	•	SUB.W	: Select if the REAR LINE OUT terminals are used for
	Line output mode			connecting a subwoofer (through an external amplifier).
		•	REAR	: Select if the REAR LINE OUT terminals are used for
				connecting the speakers (through an external amplifier).
	SUB.W FREQ*11	•	LOW	: Frequencies lower than 72 Hz are sent to the subwoofer.
	Subwoofer cutoff	•	MID	: Frequencies lower than 111 Hz are sent to the subwoofer.
	frequency	•	HIGH	: Frequencies lower than 157 Hz are sent to the subwoofer.
	SUB.W LEVEL*11	SUB.W 00 —		: Adjust the subwoofer output level.
	Subwoofer level	SUB.W 08		[Initial: SUB.W 04]
	BEEP	•	BEEP OFF	: Deactivates the keypress tone.
	Keypress tone	•	BEEP ON	: Activates the keypress tone.
	AMP GAIN*12	•	LOW POWER	: VOLUME 00 – VOLUME 30 (Select if the maximum power
	Amplifier gain			of each speaker is less than 50 W to prevent damaging the
	control			speaker.)
		•	HIGH POWER	: VOLUME 00 – VOLUME 50

*9 If you are using a two-speaker system, set the fader level to “00.” *10 This adjustment will not affect the subwoofer output.

*11 Displayed only when “L/O MODE” is set to “SUB.W.”

*12 The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level set higher than “VOLUME 30.”

Continued on the next page

ENGLISH

SETTINGS 25