JVC GR-AX210 specifications Random Assemble Editing R.A.Edit, Find EDIT-IN Point, Start Editing

NOTES:

Tape Dubbing

CONNECT EQUIPMENT

1 Following the illustration at left, connect the camcorder and the VCR. If you have a Remote PAUSE terminal, use the editing cable to connect it to the camcorder and the VCR. (See “NOTES” below for details.)

PREPARE FOR DUBBING

2 Set the camcorder’s power switch to PLAY, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

SELECT VCR MODE

30EDITING

EDIT PLAY/PAUSE

Power switch

To EDIT		3	Engage the VCR’s AUX and Record-Pause modes.
	To AUDIO out
	To VIDEO out		FIND EDIT-IN POINT
			Engage the camcorder’s Play mode to find a spot
Editing cable	Audio and Video	4 just before the edit-in point. Once it’s reached, press
	cable (optional)		PAUSE on the camcorder.
(provided)
			START EDITING
	If your TV/VCR
			Press PLAY on the camcorder and engage the VCR’s
	has the SCART
		5 Record mode.
	connector, use
	the provided		STOP EDITING TEMPORARILY
To Remote	cable adapter.
			Engage the VCR’s Record-Pause mode and press
PAUSE	To AUDIO IN
		6 PAUSE on the camcorder.
	To VIDEO IN
			EDIT MORE SEGMENTS
			Repeat steps 4 through 6 for additional editing, then
		7 stop the VCR and camcorder when finished.

VCR (Recording deck)

●When using a Remote PAUSE terminal, pressing EDIT on the camcorder in step 5 automatically engages the VCR’s Record mode.

●When using a Remote PAUSE terminal, you can access a function called Master Edit Control System. Before beginning, reset the camcorder’s counter to “M0:00:00” at an edit-out point. When the tape reaches this point (remember there’s a small margin of error) during editing, the camcorder and VCR pause automatically. However, some VCRs are not compatible with the Master Edit Control System.

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the optional RM-V704U MBR (Multi- Brand Remote) is set to operate with your brand of VCR (see chart at left), but can also be performed by operating the VCR manually.

CONTINUED ON NEXT PAGE

GR-AX210EK-2 30

96.10.8, 1:25 PM