JVC GR-AX210 Load a Cassette, Enter RECORD-STANDBY Mode, Start Shooting, Stop Recording

12

RECORDINGBasic Recording

LENS COVER

SWITCH

POWER

Start/Stop button

The power indicator

Tape remaining time indicator

90MIN 89MIN 3MIN

1MIN (Blinking) 2MIN (Blinking)

0MIN (Blinking)

*MIN.....(Now calculating)

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (☞ pg. 6)

●Recording Mode Setting (☞ pg. 9)

●Grip Adjustment (☞ pg. 10)

LOAD A CASSETTE

1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

ENTER RECORD–STANDBY MODE

2 Slide the LENS COVER open/close switch to open the lens cover, then set the power switch to

CAMERA.

•The power indicator lights and the camcorder enters the Record–Standby Mode.

•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Press the Recording Start/Stop button.

•The tally lamp lights while recording is in progress, and “REC ” appears in the viewfinder.

STOP RECORDING

4 Press the Recording Start/Stop button again.

•The comcorder re-enters the Record-Standby mode.

NOTES:

	● A cassette holder can’t be opened unless a power
	supply is attached.
	● There may be a delay after you slide EJECT until the
	holder opens. Do not use force.
	● The tape‘s remaining time is displayed in the
	viewfinder as shown.
	● ”TAPE END“ appears when the tape recheas its end,
	and the power goes off automatically if left in this
	condition for 5 minutes.”TAPE END“ also appears
	when a cassette whose tape is already at its end is
	loaded.
Tally lamp
	● If the Record–Standby mode continues for 5 minutes,
	the camcorder’s power shuts off automatically. Set the
	power switch to POWER OFF, and then back to
	CAMERA to turn the camcorder on again.
	● If you’re recording on a cassette from the middle, use
	the RETAKE function (☞ pg. 13) to find the end of the
	last recording so you don’t erase any of it.
	● The LENS COVER warning blinks for about 5 seconds
	when the camcorder is turned on, whether the cover is
	open or closed.

GR-AX210EK-2 12

96.10.8, 1:25 PM