JVC GR-AXM20, GR-AXM10 manual EN Recording, Retake R/F, Feature, Purpose, Operation

18EN RECORDING

BasicFeatures

Zoom-in

Zoom-out

Zoom indicator

RETAKE (R/F)

Power zoom lever

FEATURE:	Zooming
PURPOSE:	Varies the focal length of the lens
	and produces the zoom in/out effect.
OPERATION:	Zoom In
	1) Push the power zoom lever down
	toward “T”.
	Zoom Out

1)Push the lever up toward “W”.

NOTES: ● The further the power zoom lever

	is pushed, the faster the zoom
	speed becomes.
	● Focusing may become unstable
	during zooming. In this case, set
	the zoom while in Record–
	Standby, set manual focus or Focus
	Lock (☞ pgs. 22, 23), then zoom
	in or out in Record mode.
FEATURE:	Quick Review
PURPOSE:	To check the end of the last record-
	ing.
OPERATION:	1) Press “ ” and release quickly
	during the Record–Standby mode.
	•Tape is rewound for about 2
	seconds and played back
	automatically, then pauses in
	Record–Standby mode for the
	next shot.
NOTE:	Distortion may occur at start of
	playback. This is normal.
FEATURE:	Retake
PURPOSE:	To re-record certain segments.
OPERATION:	1) Make sure the camcorder is in the
	Record–Standby mode.
	2) Press either RETAKE button to
	reach the start point for new
	recording.
	Pressing “F” fast-forwards the tape
	and pressing “R” reverses it.
	3) Press Recording Start/Stop to start
	recording.
NOTE:	Noise may appear during Retake.
	This is normal.