JVC GR-AXM20, GR-AXM10 manual Make Setting, Menu, This camcorder is equipped with an easy-to-use

28EN RECORDING

AdvancedFeatures(cont.)

MENU		Using Menu For Detailed Adjustment
		This camcorder is equipped with an easy-to-use,
FAR	NEAR	on-screen menu system that simplifies many of the more
		detailed camcorder settings.

PROGRAM AE select dial

LCD monitor or viewfinder

GAIN UP	S.LX
TELE MACRO	OFF
INTERVAL TIMER	OFF
REC TIME	OFF
JLIP ID NO.	07
SET CHARACTER
DATE/TIME
END :MENU KEY
GAIN UP	NORM
TELE MACRO	ON
INTERVAL TIMER	1MIN
REC TIME	1/2S
JLIP ID NO.	07
SET CHARACTER
DATE/TIME

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

ACCESS MENU SCREEN

2 Press MENU.

SELECT FUNCTION

3 Press + or – to place the highlight bar on the desired function.

MAKE SETTING

4 The setting procedure depends on the function you select.

If you select GAIN UP, TELE MACRO, INTERVAL TIMER, REC TIME or JLIP ID NO. . . .

.... press FAR or NEAR to cycle through the choices

until the desired setting appears.

If you select SET CHARACTER or DATE/TIME, . . .

.... press NEAR to access the selection menu for

each function (SET CHARACTER – ☞ pg. 25; DATE/TIME – ☞ pg. 11).

CLOSE MENU

5 Press MENU. The normal screen reappears.

NOTE:

The menu is available only in the Record-Standby mode.

END :MENU KEY

PAUSE

If GAIN UP or TELE MACRO in the Menu has been changed from the factory settings, this mark appears.