14 EN GETTING STARTED
Using The Battery Pack
Perform steps 2 – 3 in “Charging The Battery Pack” ( pg. 13).
Maximum continuous recording time
Battery pack | LCD monitor | Viewfinder on | |
on | |||
|
| ||
|
|
| |
1 hr. 50 min. | 2 hrs. 15 min. | ||
|
|
| |
3 hrs. 40 min. | 4 hrs. 30 min. | ||
|
|
| |
5 hrs. 30 min. | 6 hrs. 45 min. | ||
|
|
| |
* Provided |
|
|
NOTES:
●Recording time is reduced significantly under the following conditions:
•Zoom or
•The LCD monitor is used repeatedly.
•The playback mode is engaged repeatedly.
•The LED Light is used.
●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
Data Battery System
You can check the remaining battery power and the recordable time.
When the battery is attached, press DATA.
BATTERY CONDITION
100% MAX TIME
LCD
50% |
|
| min |
|
|
| |
|
| FINDER | |
|
|
| |
|
| ||
0% |
|
| min |
| |||
|
|
|
●When the Power Switch is set to “OFF”, it is displayed for approx. 3 seconds if the button is pressed and released quickly, and for approx. 15 seconds if the button is pressed and hold for several seconds.
●When the Power Switch is set to “PLAY” or “REC”, press DATA again to return to the normal screen.
●Data battery status cannot be displayed during playback or while recording is in progress.