JVC GR-D775U Date/Time Settings, Viewfinder Adjustment, Tripod Mounting, Brightness Adjustment Of The Display, CAUTION:

GETTING STARTED EN 15

Date/Time Settings

1 Select	CLOCK ADJ.
	MONTH. DATE. YEAR 12h

JAN. 03. 2007 02 : 10 AM

2SET

The date/time is recorded onto the tape at all times, but its display can be turned on or off. ( pg. 34, 35)

Perform steps 1 – 3 in “Language Settings” ( pg. 14).

1 Select “DISPLAY”, press SET or 2.

2 Select “CLOCK ADJ.”, press SET or 2.

3 Select the desired date display format, press SET or 2.

●Repeat this step to input time display format (Select from “24h” or “12h”), month, date, year, hour and minutes.

4 Press MENU.

Brightness Adjustment Of The Display

1Select

BRIGHT ± 0

2SET

Perform steps 1 – 3 in “Language Settings” ( pg. 14).

●To adjust the brightness of the viewfinder, pull out the viewfinder fully and set “PRIORITY” to “FINDER” ( pg. 34).

1 Select “DISPLAY”, press SET or 2.

2 Select “BRIGHT”, press SET or 2.

3 Select the appropriate brightness, press SET or 2.

4 Press MENU.

GETTING STARTED

Press 1 whenever you want to return to the previous menu screen/setting.

Viewfinder Adjustment

1 Set the Power Switch to “REC” while pressing down the Lock Button located on the switch.

2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.

3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.

Example:

Press 1 whenever you want to return to the previous menu screen.

Tripod Mounting

To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.

●Some tripods are not equipped with studs.

Diopter Adjustment Control

CAUTION:

When retracting the viewfinder, take care not to pinch your fingers.