28 EN ADDITIONAL FEATURES FOR D.S.C.
Resetting The File Name
By resetting the file name, a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously made files.
1 Perform steps 1 – 3 in “Normal Playback Of Images” ( pg. 27).
2 Press MENU. | 1 Select |
3 Select “NO.RESET”, press |
|
SET or 2. The NO. RESET |
|
screen appears. |
|
4 Select “EXECUTE”, press
SET. The new folder (such as 2 SET “101JVCGR”) will be made and
the file name of the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder (such as “101JVCGR”) will be made and the file name will start again from DVC00001.
Protecting Files
The Protect mode helps prevent the accidental erasure of files.
1 Perform steps 1 – 3 in “Normal Playback Of Images” ( pg. 27).
2
3 Select “PROTECT”, press SET or 2. The PROTECT menu appears.
●Press 1 whenever you want to return to the previous menu screen.
6 Select “EXECUTE”, |
| |
PROTECT | ||
press SET. |
| PROTECT ? |
●To cancel protection,
select “RETURN”. | EXECUTE | |
RETURN | ||
| ||
for all files you want to protect. |
|
4 Select “PROT.ALL”, press SET or 2. The PROTECT screen appears.
5 Select “EXECUTE”, press SET.
●To cancel protection, select “RETURN”.
NOTE:
If the “
” mark appears, the currently displayed file is protected.
To Remove Protection
Before doing the following, perform steps 1 – 3 in “Protecting Files”.
To remove protection from the currently displayed file4 Select “CURRENT”, press SET or 2. The PROTECT screen appears.
5 Press 1 or 2 to select the desired file.
6 Select “EXECUTE”, press SET.
●To cancel selection, select “RETURN”.
●Repeat steps 5 and 6 for all files you want to remove protection.
To remove protection from all files stored in the memory card4 Select “CANC.ALL”, press SET or 2. The PROTECT screen appears.
5 Select “EXECUTE”, press SET.
| To protect the currently displayed file | ● To cancel selection, select “RETURN”. |
4 Select “CURRENT”, press SET or 2. The PROTECT screen appears.
5 Press 1 or 2 to select the desired file.
PROTECT
CURRENT
PROT.ALL
CANC.ALL
Select