1 Make sure all units are turned off.
Connections To A TV Or VCR 2
Connect the camcorder to a TV or VCR as shown in the illustration.
| If using a VCR, go to step 3. | |
| If not, go to step 4. | |
| 3 Connect the VCR output to the TV input, | |
| referring to your VCR’s instruction manual. | |
To AV | 4 Turn on the camcorder, the VCR and the | |
TV. | ||
connector | ||
5 Set the VCR to its AUX input mode, and set | ||
or | ||
the TV to its VIDEO mode. | ||
| 6 Start playback on the camcorder. | |
Audio/Video cable | ||
● Please set “16:9 OUTPUT” of Playback Menus | ||
(provided) | ||
so that the image may suit your TV (16:9 TV or | ||
| ||
| 4:3 TV). ( pg. 34, 35) | |
| To choose whether or not the following | |
| displays appear on the connected TV | |
| ● Date/Time | |
| ||
| Or, press DISPLAY on the remote control to turn | |
TV | on/off the date indication. | |
● Time Code | ||
| ||
| ||
VCR | ● Indications other than date/time and time code | |
| Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV” | |
1Yellow to VIDEO IN (Connect when your TV/ | ||
NOTES: | ||
VCR has only A/V input connectors.) | ||
2Red to AUDIO R IN* | ● It is recommended to use the AC Adapter as | |
3White to AUDIO L IN* | the power supply instead of the battery | |
* Not required for watching still images only. | ||
| ● To monitor the picture and sound from the | |
| camcorder without inserting a tape or memory | |
| card, set the camcorder’s Power Switch | |
| to“REC”, then set your TV to the appropriate | |
| input mode. | |
| ● Make sure you adjust the TV sound volume to its | |
| minimum level to avoid a sudden burst of sound | |
| when the camcorder is turned on. |
RECORDING & PLAYBACK