JVC GR-D775U Computer, Connection To A Personal, Using USB cable, Using DV cable, 44 EN EDITING, cable, [B] Using DV, [A] Using USB, NEVER disconnect the USB cable while

44 EN EDITING

	Connection To A Personal			[A]	Using USB cable
It is possible to transfer still images stored on a
			Computer
				memory card to a PC.
				[B]	Using DV cable
[A] Using USB		OR	[B] Using DV
	cable		cable

It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.

If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.

To USB	To DV IN/OUT
	NOTES:

Core filter

DV cable

USB cable(optional) (provided)

Core filter

To DV

connector

To USB	or
connector

PC PC with DV connector

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

●Connect the DV cable first to the PC, and then to the camcorder.

●Connect the DV cable (plugs) correctly according to the shape of the DV connector.

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

●If, after connecting a DV cable to the camcoder and it doesn’t work, restart the camcoder.

●Do not remove memory card during USB connection between PC and set.

“USB” and/or “ ” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while“ ” is displayed on the LCD monitor since this can result in product damage.