Set “[T] ➝ [M] COPY” to “ON”. ( pg. 35) Press 6 to start playback.
42 EN FEATURES FOR RECORDINGS
Dubbing Still Images Recorded On A Tape To A Memory Card

Still images can be dubbed from a tape to a memory card.

1 Load a cassette. ( pg. 16)

2 Load a memory card. ( pg. 17)

3 Set the VIDEO/MEMORY Switch to “VIDEO”.

4 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5

6

7 At the point you want to dub, press 6 again to engage Still Playback.

8 To dub the image, press SNAPSHOT.

●The “ ” indication appears during dubbing.

NOTE:

To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control. ( pg. 24)

EDITING

Dubbing To A VCR

To use this camcorder as a player

1 Following the illustration,  pg. 23,

“Connections To A TV Or VCR” , connect the camcorder and the VCR’s input connectors.

2 Perform steps 1 - 6 ( pg. 23)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)

●To choose whether or not the following displays appear on the connected TV

•Date/time

Set “DATE/TIME” to “ON” or “OFF”

( pg. 35). Or, press DISPLAY on the remote control to turn on/off the date indication.

•Time code

Set “TIME CODE” to “OFF” or “ON” ( pg. 35).

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV” ( pg. 35).