JVC GR-DV2000 Initializing A Memory Card

EN49
DLEIMAGECTPROTE
DL
.
.EFRAME
DPOFATFORM
NRETUR
FO MATR
FO MATR
EX STINGI
ERASE DATA? ALL
EXECUTE
–CANCEL
CANCEL
EXECUTE
MENU Wheel
Lock Button
Power Switch
Display
Initializing A Memory Card
You can initialize a memory card anytime.
After initializing, all images and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the Power Switch to “ ”, while pressing down
the Lock Button located on the switch. Open the LCD
monitor fully or pull out the viewfinder fully.
2
Press MEMORY PLAY.
3
Press the MENU wheel. The Menu Screen appears.
4
Press the MENU wheel again. The MEMORY Menu
appears.
5
Rotate the MENU wheel to select “FORMAT” and
press it. The Confirmation Screen appears.
6
Rotate the MENU wheel to select “EXECUTE” and
press it. The memory card is initialized. When
initialization is finished, “NO IMAGES STORED”
appears.
•To cancel initialization, rotate the MENU wheel to
select “CANCEL” and press it.
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted
during initialization. If the memory card
becomes corrupted initialize it.
Menu Screen
MEMORY PLAY Button