88 EN |
| INDEX Indications (cont.) | |
| Indications | Function | |
|
|
| |
| INSERT ERROR! | ● Appears if Insert Editing is attempted on a tape recorded in the LP mode. | |
| <CANNOT EDIT |
| ( pg. 72) |
| ON A LP RECORDED | ● Appears if INSERT (w) on the remote control is pressed when the erase | |
| TAPE> | ||
| protection tab is set to “SAVE”. | ( pg. 72) | |
| <CHECK TAPE’S ERASE | ||
| ● Appears if the Shooting Mode Switch is set to “XGA/VGA” or “UXGA”. | ||
| PROTECTION TAB> | ||
|
| ( pg. 16) | |
| <CHECK SHOOTING |
| |
| MODE SWITCH> |
|
|
| MEMORY IS FULL | Appears when the memory card’s memory is full and shooting is not | |
| possible. |
| |
|
|
| |
●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.
●Appears in the following cases when dubbing from a tape to a memory
COPYING FAILED | card: |
|
– when no memory card is loaded. |
| |
|
| |
| – when the memory card's memory is full. |
|
| – when the memory card is not formatted. | ( pg. 60) |
| – when a | |
|
| |
| Appears in the following cases if a memory card is not loaded when | |
| SNAPSHOT is pressed: |
|
MEMORY CARD! | – when the Power Switch is set to “ ” or “ ” and the Shooting Mode | |
Switch is set to “XGA/VGA” or “UXGA”. |
| |
|
| |
–when the Shooting Mode Switch is set to “VIDEO” and “CAMERA
| MODE” is set to “DUAL” in the Menu Screen. | ( pg. 21, 26) | ||
|
| |||
PLEASE | Appears when there is a problem with a memory card and its memory is | |||
corrupt, or it has not been initialized. Initialize the memory card . | ||||
FORMAT | ||||
|
| ( pg. 49) | ||
|
|
| ||
|
| |||
NO IMAGES STORED | Appears if there is no images stored in the memory card when the Power | |||
Switch is set to “ | ” and MEMORY PLAY is pressed. |
| ||
|
| |||
|
| |||
| Appears when the camcorder takes more than 60 seconds to recognize the | |||
CARD ERROR! | loaded memory card. Remove the memory card once and insert it again. | |||
Repeat these procedures until no indication appears. If the indication still | ||||
| ||||
| appears, the memory card is corrupted. |
| ||
|
| |||
CHECK CARD’S WRITE | Appears when you attempt to shoot digital still images while a copy- | |||
PROTECTION SWITCH | protected SD Memory Card is loaded. |
| ||
|
| |||
E01 — E06 | The error indications (E01 — E06) show what type of malfunction has | |||
occured. When an error indication appears, the camcorder turns off | ||||
UNIT IN SAFEGUARD | ||||
automatically. Remove the power supply (battery, etc.) and wait a few | ||||
MODE REMOVE AND | ||||
minutes for the indication to clear. When it does, you can resume using the | ||||
REATTACH BATTERY | ||||
camcorder. If the indication remains, consult your nearest JVC dealer. | ||||
| ||||
