EN79

SYMPTOM

44.An unusual mark appears.

45.An error indication (E01 — E06) appears.

46.The charger indicator on the AC Power Adapter/ Charger does not light.

47.Picture does not appear on the LCD monitor.

48.When the image is printed from the printer, a black bar appears at the bottom of the screen.

49.When the camcorder is connected via the DV connector, the camcorder does not operate.

50.During transport, the lens cover opens.

51.The memory card cannot be removed from the camcorder.

POSSIBLE CAUSES

 

CORRECTIVE ACTION

44.

 

44. • Check the section of the

————

 

manual that explains LCD

 

monitor/viewfinder

 

 

 

 

indications ( pg. 84 – 88).

 

 

 

45. •A malfunction of some kind

 

45. • Remove the power supply

has occurred. In this case the

 

(battery pack, etc.) and wait

camcorder’s functions

 

a few minutes for the

become unusable.

 

indication to clear. When it

 

 

does, you can resume using

 

 

the camcorder.

 

 

If the indication remains

 

 

even though you repeat the

 

 

above two or three times,

 

 

please consult your nearest

 

 

JVC dealer.

 

 

 

46. •The temperature of the

 

46. • To protect the battery, it is

battery is extremely high/low.

 

recommended to charge it

•Charging is difficult in places

 

in places with a temperature

subject to extremely high/

 

of 10°C to 35°C (50°F to

low temperatures.

 

95°F) ( pg. 89).

 

 

 

47. •The viewfinder is pulled out.

 

47. • Push the viewfinder back in.

•The LCD monitor’s

 

• Adjust the brightness of the

brightness setting is too dark.

 

LCD monitor ( pg. 18).

 

 

• If the monitor is tilted

 

 

upward 180 degrees, open

 

 

the monitor fully ( pg. 18).

 

 

 

48. •This is not a malfunction.

 

48. • By recording with “DIS”

 

 

activated ( pg. 30) this

 

 

can be avoided.

 

 

 

49. •The DV cable was plugged/

 

49. • Turn the camcorder’s power

unplugged with power

 

off and on again, then

turned on.

 

operate it.

 

 

 

50.

 

50. • Do not subject the

 

 

camcorder to shock or

————

 

excessive vibration during

 

transport.

 

 

 

 

• Turn the camcorder on and

 

 

off. The lens cover closes.

 

 

 

51.

 

51. • Push in the memory card a

————

 

few more times ( pg. 13).

 

 

 

Page 79
Image 79
JVC GR-DV2000 specifications EN79