8 EN

 

GETTING STARTED

 

Battery pack

 

 

Power

 

 

 

 

 

BN-V408U,

 

 

This camcorder’s 2-way power supply system lets you

 

BN-V416U or

To AC outlet

choose the most appropriate source of power. Do not use

BN-V428U

 

provided power supply units with other equipment.

 

 

 

 

 

AC Power

 

Adapter/

 

Charger

POWER

DC OUT connector

indicator

CHARGE indicator

Battery pack

Fully charging time

BN-V408U

approx. 1 hr. 30 min.

BN-V416U (optional)

approx. 2 hrs.

BN-V428U (optional)

approx. 3 hrs. 20 min.

CHARGING THE BATTERY PACK

1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.

2 Attach the battery pack with the mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE indicator begins blinking to indicate charging has started.

3 When the CHARGE indicator stops blinking but stays lit, charging is finished. Slide the battery and lift off. Remember to unplug the AC Adapter/Charger’s power cord from the AC outlet.

NOTES:

If the protective cap is attached to the battery pack, remove it first.

Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incom- plete.

Charging times noted above are for a fully discharged battery pack.

Charging time varies according to the ambient temperature and the status of the battery pack.

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C/50°F), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

Page 8
Image 8
JVC GR-DV2000 Power, Charging the Battery Pack, About Batteries, Provided power supply units with other equipment