JVC LYT0610-001A, GR-DVL107 Playback Basic Playback, EN29, To Control The Speaker Volume

Load a tape (☞ pg. 10).

PLAYBACKBasicPlayback

EN29

Rewind Button (2)

Stop Button (5)

Play/Pause Button (4/6)

Fast-Forward Button (3)

Power Zoom

Lever (VOL.)

1

2 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (VOL.) towards “+” to turn

up the volume, or towards “–” to turn down the volume.

NOTES:

Speaker

			OFF
		Y
	A
P	L

Lock Button

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automati-

cally. To turn on again, set the Power Switch to “OFF”, then

to “ ”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (☞ pg. 32).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied through the DC cord: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Power Switch

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6 is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback: Allows frame-by-frame search.

1)Engage Still Playback.

2)Rotate MENU/BRIGHT towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse Frame-By-Frame Playback during Still Playback.

■To resume normal playback, press 4/6.

●You can also use the provided remote control for Frame-By-Frame Playback (☞ pg. 41).

Playback Zoom and Playback Special Effects

Available only with the remote control (provided) (☞ pg. 41, 42).