56EN

TROUBLESHOOTING(cont.)

SYMPTOM

 

POSSIBLE CAUSES

 

CORRECTIVE ACTION

39. An error indication

 

39. •A malfunction of some kind

 

39. •Remove the power supply

(E01 — E06) appears.

 

has occurred. In this case

 

(battery pack, etc.) and wait a

 

 

the camcorder’s functions

 

few minutes for the indication

 

 

become unusable.

 

to clear. When it does, you

 

 

 

 

can resume using the

 

 

 

 

camcorder.

 

 

 

 

If the indication remains even

 

 

 

 

though you repeat the above

 

 

 

 

two or three times, please

 

 

 

 

consult your nearest JVC

 

 

 

 

dealer.

 

 

 

 

 

40. The charger indicator on

 

40. •The temperature of the

 

40. •To protect the battery, it is

the AC Power Adapter/

 

battery is extremely high/low.

 

recommended to charge it

Charger does not light.

 

•Charging is difficult in

 

in places with a temperature

 

 

places subject to extremely

 

of 10°C to 35°C (pg. 63).

 

 

high/low temperatures.

 

 

 

 

 

 

 

41. Picture does not appear on

 

41. •The lens cap is attached.

 

41. •Remove the lens cap

the LCD monitor.

 

•The LCD monitor's

 

(pg. 12).

 

 

brightness setting is too

 

•Adjust the brightness of the

 

 

dark.

 

LCD monitor (pg. 12).

 

 

 

 

•If the monitor is tilted

 

 

 

 

upward 180 degrees, open

 

 

 

 

the monitor fully (pg. 13).

 

 

 

 

 

42. When the image is printed

 

42. •This is not a malfunction.

 

42. •By recording with “DIS”

from the printer, a black

 

 

 

activated (pg. 22) this

bar appears at the bottom

 

 

 

can be avoided.

of the screen.

 

 

 

 

 

 

 

 

 

43. When the camcorder is

 

43. •The DV cable was plugged/

 

43. •Turn the camcorder’s power

connected via the DV

 

unplugged with power

 

off and on again, then

connector, the camcorder

 

turned on.

 

operate it.

does not operate.

 

 

 

 

 

 

 

 

 

Page 56
Image 56
JVC GR-DVL107, LYT0610-001A specifications 56 EN