EN33
C. Connection to a TV or VCR equipped with an
*When connecting the cables, open this cover.
|
|
| When the |
|
|
| cable is not used. |
|
|
| ← |
| Audio/Video cable | Yellow to VIDEO IN | |
|
| ||
|
| ||
| (provided) |
|
|
| Core filter |
| White to AUDIO L IN |
|
|
| |
| To AV |
| Red to AUDIO R IN |
|
|
| |
To S | Core | To | |
| (provided) |
| |
| filter |
| |
|
|
| |
To TV or VCR
Connector cover*
TV |
VCR
1
2
3
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the
Menu Screen (☞ pg. 30). •Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen (☞ pg. 30).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen (☞ pg. 30). Or, press DISPLAY on the remote control (provided).
NOTES:
●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).
●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.
●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “ 
” or “ 
”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
