Remote sensor
Zoom Buttons | Up Button |
SHIFT | Down |
Left or SLOW | Button |
Rewind Button | PLAY |
|
PAUSE
Right or SLOW | STOP |
Forward Button |
|
Normal playback | Press T |
To move image, press (Right) while keeping SHIFT held down.
EN41
FEATURE: Slow-Motion Playback
PURPOSE:
To allow
OPERATION:
1)To change from normal to
approx. 1 minute in Slow Rewind or approx. 2 minutes in Slow Forward, normal playback resumes.
■To stop Slow-Motion Playback, press PLAY (4).
NOTES:
●During
●After SLOW (9 or 0) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.
●There may be a small margin between the slow- motion playback start point you chose and the actual start point for
●During
●During
FEATURE: Frame-By-Frame Playback
PURPOSE:
To allow
OPERATION:
1)To change from normal to
FEATURE: Playback Zoom
PURPOSE:
To magnify the recorded image up to 10X at any time during playback.
OPERATION:
1)Press PLAY (4) to find the scene of interest.
2)Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in.
3)You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT, press (Left), (Right), (Up) and (Down).
■To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press PLAY (4).
NOTES:
●Zoom can also be used during
●Due to digital image processing, the quality of the image may suffer.