JVC GR-DVL120 62 EN, Warning Indications, INDEX, Function, Indications, INDEX Indications (cont.)

62 EN		INDEX Indications (cont.)
Warning Indications
Indications	Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator		blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.		( pg. 12)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the Power
PROTECTION TAB	Switch is set to “ ” or “ ”.		( pg. 12)
	Appears if dirt is detected on the heads during recording or playback.
HEAD CLEANING	Use an optional cleaning cassette.		( pg. 55)
REQUIRED USE
CLEANING CASSETTE
	Appears if condensation occurs. When this indication is displayed, wait more
CONDENSATION	than 1 hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
	Appears if a tape is not loaded when the Recording Start/Stop Button or
TAPE!	SNAPSHOT Button is pressed while the Power Switch is set to “		” or
	“ ”.
TAPE END	Appears when the tape ends during recording or playback.		( pg. 47)
DIFFERENT	Appears if a tape in another format is loaded.
FORMATTED TAPE
	● Appears when the date/time is not set.		( pg. 11)
SET DATE/TIME!	● Appears when the built-in clock battery runs out and the previously set
	date/time is erased. Consult your nearest JVC dealer for replacement.
LENS COVER	Appears for 5 seconds after power is turned on if the lens cap is attached.
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape.
			( pg. 43)
A. DUB ERROR!	● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.
<CANNOT DUB			( pg. 43)
ON A LP RECORDED TAPE>	● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.
<CANNOT DUB			( pg. 43)
ON A 16BIT	● Appears if A. DUB (e) on the remote control is pressed when the erase
RECORDING>	protection tab is set to “SAVE”.		( pg. 43)
<CHECK TAPE’S ERASE
PROTECTION TAB>
INSERT ERROR!	Appears if Insert Editing is attempted on a blank portion of a tape.
			( pg. 44)
INSERT ERROR!	● Appears if Insert Editing is attempted on a tape recorded in the LP mode.
<CANNOT EDIT			( pg. 44)
ON A LP RECORDED TAPE>	● Appears if INSERT (w) on the remote control is pressed when the erase
<CHECK TAPE’S ERASE	protection tab is set to “SAVE”.		( pg. 44)
PROTECTION TAB>
E01, E02 or E06	The error indications (E01, E02 or E06) show what type of malfunction has
	occured. When an error indication appears, the camcorder turns off
UNIT IN SAFEGUARD
	automatically. Remove the power supply (battery, etc.) and wait a few
MODE REMOVE AND
	minutes for the indication to clear. When it does, you can resume using the
REATTACH BATTERY
	camcorder. If the indication remains, consult your nearest JVC dealer.
E03 or E04	The error indications (E03 or E04) show what type of malfunction has
	occured. When an error indication appears, the camcorder turns off
UNIT IN SAFEGUARD
	automatically. Eject the cassette once and re-insert it, then check if the
MODE EJECT AND
	indication clears. When it does, you can resume using the camcorder. If the
REINSERT TAPE
	indication remains, consult your nearest JVC dealer.