JVC GR-DVL120 22 EN, Blank Search, 3 Press BLANK SEARCH, To cancel Blank Search midway, pg. 12), Load a tape, ..... press

Load a tape (
pg. 12).

22 EN PLAYBACK (cont.)

BLANK SEARCLH Button

Lock Button

Power Switch

Display

44

BLANK SEARCH

Stop Button (5)

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption (
pg. 18).

1

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 Press BLANK SEARCH.

•“BLANK SEARCH” appears blinking and the camcorder automatically starts reverse or forward shuttle search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

To cancel Blank Search midway . . ...... press 5.

NOTES:

●In step 3, if the current position is at a blank portion the camcorder searches in the reverse direction, and if the current position is at a recorded portion the camcorder searches in the forward direction.

●Blank Search does not work if “HEAD CLEANING REQUIRED. USE CLEANING CASSETTE” has appeared with the tape.

●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●A blank portion which is shorter than 5 seconds of tape may not be detected.

●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.