EN 21

1 Make sure all units are turned off.2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 20).If using a VCR . . . go to step 3.If not . . . go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4 Turn on the camcorder, the VCR and the TV.5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.To choose whether or not the following displays appear on the connected TV . . .• Date/Time..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in theMenu Screen ( pg. 36).• Time Code..... set “TIME CODE” to “ON” or “OFF” in the MenuScreen ( pg. 36).•Playback Sound Mode, Tape Speed And Tape Running Displays for tape playback..... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen ( pg. 36).

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable.

Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “ ” or “ ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●While the Audio/Video cable is connected to the AV connector, sound cannot be heard from the speaker.