Lock Button
Power Switch
Power Zoom Lever (VOL.)
Play/Pause Button (4/6) 
Rewind Button (2) 
EN21
Normal Playback
1 Load a tape ( pg. 12).Set the VIDEO/DSC Switch to “VIDEO” | |
| 2 only), then set the Power Switch to “ | ” while |
pressing down the Lock Button located on the switch. To start playback, press 4/6.
•To stop playback, press 5.•Press 2to rewind, or 3toStop Button (5) 
Speaker
NOTES:
| ● If Stop mode continues for 5 minutes when power is | ||
supplied from a battery, the camcorder shuts off automati- | ||
cally. To turn on again, set the Power Switch to “OFF”, then | ||
| to “ | ”. |
|
● The playback picture can be viewed in the LCD monitor, | ||
| viewfinder or on a connected TV ( pg. 22). |
| |
● You can also view the playback picture on the LCD monitor | ||
with it flipped over and pushed against the camera body. | ||
| ● LCD monitor/viewfinder indications: |
| |
| • When power is supplied from a battery: the “ | ” | |
VIDEO/DSC Switch
| battery pack remaining power indicator is displayed. | |
| When power is supplied from an AC outlet: “ | ” does |
| not appear. |
|
• During Stop mode, none of the indications are displayed. | |
● When a cable is connected to the AV connector, the sound | |
| is not heard from the speaker. |
|
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●When 4/6is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
Shuttle Search: Allows●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.
●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
2)Rotate the MENU/BRIGHT wheel towards “+” for forward
●If you are using the