MENU/BRIGHT Wheel
Lock Button
Power Switch
VIDEO/DSC Switch (Open the
LCD monitor to access this switch)
Display
I NDEX |
|
|
| Menu Screen | ||
PROTECT |
|
|
|
| ||
DELETE |
|
|
|
| ||
DPOF |
|
|
|
|
| |
FORMAT |
|
|
|
| ||
RETURN |
|
|
|
| ||
EXIT |
| <PROTECT > |
|
| PROTECT Index | |
1 | F | 2 | S | 3 | S | Screen |
4 | F | 5 | F | 6 | F |
|
Padlock mark
Normal playback |
|
| If Protection | ||
|
|
|
|
| is removed |
EXIT |
| <PROTECT > |
|
| |
1 | F | 2 | S | 3 | S |
4 | F | 5 | F | 6 | F |
EN31
Protecting ImagesThe Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality indication, that image cannot be deleted.
1 Set the VIDEO/DSC Switch to “
”, then set thePower Switch to “ ” while pressing down the Lock Button.•A stored image is displayed.
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “ 
MEMORY” and press it. The MEMORY Menu appears.
3 Rotate the MENU/BRIGHT wheel to select “PROTECT” and press it. The PROTECT Index Screen appears.
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3 above.
4 Rotate the MENU/BRIGHT wheel to move the green frame to the desired image and press it. A “
” padlock mark appears on the selected image. Repeat this procedure for all images you do not wish to delete by accident.
5 Rotate the MENU/BRIGHT wheel upward to select “EXIT” and press it. The normal playback screen appears.
NOTE:
When the memory is initialized or corrupted, even protected images are deleted. If you do not want to lose important images, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3 above.
4 Rotate the MENU/BRIGHT wheel to move the green frame to the desired image and press it. The “
” padlock mark located above the image disappears and the image is no longer protected.
5 Rotate the MENU/BRIGHT wheel upward to select “EXIT” and press it. The normal playback screen appears.
Normal playback