54 EN

SNAPSHOT Button

Lock Button

Power Switch

Rewind Button (2)

Fast-Forward Button (3)

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

Display

TO COPY TO TAPE

PUSH “SNAPSHOT”

REC

DUBBING (cont.)Dubbing Images Stored In A Memory CardTo A Tape (GR-DVL817 only)

Images can be dubbed from a memory card to a tape.

1 Load a memory card ( pg. 14) and cassette ( pg. 12).

2 To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point.

32

Set the VIDEO/DSC Switch to “

”, then set the

Power Switch to “

” while pressing down the

Lock Button located on the switch.

4 To select a still image to be dubbed, perform Index

3

Playback ( pg. 29), Auto Playback ( pg. 28) or press 2or 3to select the image you wish.

5 To engage Dub-Standby, press SNAPSHOT. The message “TO COPY TO TAPE PUSH "SNAPSHOT"” appears.

6 While the message is being displayed, press SNAPSHOT. The selected still image is recorded on the tape for approx. 5 seconds.

•The indicator disappears when dubbing is complete.

NOTE:

If SNAPSHOT is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.