Following the illustration, connect the camcorder and the VCR. Also refer to pg. 22 and 23.
Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL817 only), then set the camcorder’s Power Switch to
“ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
Engage the VCR’s AUX and Record-Pause modes.

52 EN

Connector cover*

Power

Switch

To AV

To S

Audio/Video

cable (provided)

S-Video cable (optional)

White to

AUDIO L IN

Yellow to

Red to

VIDEO** IN

AUDIO R IN

To

S-VIDEO IN

VCR

*When connecting the cables,
open this cover.

TV

** Connect when an S-Video cable

 

is not used.

 

DUBBINGDubbing To A VCR

1

2

3

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6on the camcorder.

5 Press 4/6on the camcorder and engage the VCR’s Record mode.6 Engage the VCR’s Record-Pause mode and press 4/6on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen ( pg. 50).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen ( pg. 50).•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 50). Or, press DISPLAY on the

remote control (provided with GR-DVL817 only).

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable.

Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.

●You can use Playback Zoom ( pg. 60) or Playback Special Effects (GR-DVL817 only,  pg. 59) in step 5.