Open the battery compartment cover as illustrated.

56 EN

USING THE REMOTE CONTROL UNIT

1

RM-V716U

 

 

3

2

+

 

Tab

 

 

–

–

 

 

+

 

 

1

RM-V715U

+

 

3

 

–

2

 

 

 

 

+

–

A1

2

3 1

Lock hole

B

2 1 3

Knob

1

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.

For GR-DVL517/DVL515/DVL317 Owners: If you want to perform Random Assemble Editing ( pgs. 61 – 65), use the optional RM-V700U remote control.

Installing The Batteries (RM-V716U or RM-V715U, provided)

The remote control uses two ”AAA (R03)” size batteries. See “General Battery Precautions” ( pg. 85).

1

2 Insert two ”AAA (R03)” size batteries in the correct direction.3 Replace the battery compartment cover.Installing The Battery (RM-V700U, optional)The remote control uses one lithium battery (CR2025).1 There are 2 ways to pull the battery holder out of the RM-V700U. : Pull out the battery holder while sliding the lock hole.: Pinch the release tab and pull out the battery holder.2 Insert the battery in the holder, and be sure to have the “+” mark visible.3 Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries in the RM-V700U instruction manual.

Remote sensor

Transmitted beam effective area

5 m (16 ft)

30°

When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.

30°